 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Top View LEDs With Bi-Color Part Number: 67-22SURSYGC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260. If temperature is higher, time should be shorter (+10 -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230 . ITEM Resin (mold) Lens color Printed circuit board Material & For Reflow Soldering Emitted color SYG SUR MATERIALS Epoxy Water Clear BT AlGaInP AlGaInP Hyper Red Super Yellow Green NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are 0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC ELECTRO-OPTICAL CHARACTERISTICS Parameter Forward voltage Luminous intensity (TA=25) Unit V Value Test Emitted Symbol MIN. TYP. MAX. Color Condition SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG SUR SYG VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VF IV p d IFP PD IR ESD - - 24 16 - - - - - - 2.0 2.0 60 25 630 575 625 575 20 20 2.4 2.4 - - - - - - - - mcd Wavelength nm Spectral Line Half-Width Peak pulsing current (1/10 duty f=1kHz) Power Dissipation Reverse current Electrostatic Discharge nm 160 160 60 60 10 2000 mA mW A mA Absolute maximum ratings Parameter Symbol 21/2 IF VR Top Tstg Value 130 20 5 (TA=25) Unit Viewing angle at 50% IV Forward current Reverse voltage Operating temperature range Storage temperature range Deg mA V 2006/10/12 -40 ~+85 -40 ~+90 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Test items and results of reliability NO 1 Item Reflow Test Conditions TEMP2405 Min. 5sec. H+100 15min 5min L-40 15min H+100 5min 10set L-10 5min TEMP100 Test Sample Size Ac/Re Hours/Cycle 6 MIN. 22 PCS 0/1 2 Temperature Cycle 300 CYCLES 22 PCS 0/1 3 Thermal Shock 300 CYCLES 22 PCS 0/1 4 High Temperature Storage Low Temperature Storage 1000 HRS 22 PCS 0/1 5 TEMP-55 1000 HRS 22 PCS 0/1 6 DC Operating Life High Temperature / High Humidity IF=20mA 1000 HRS 22 PCS 0/1 7 85 / 85%RH 1000 HRS 22 PCS 0/1 Refer to reliability test standard specification for in this line. 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2006/10/12 |
Price & Availability of 67-22SURSYGC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |